DPS Alert

2021.12.05 17:09 MugShots DPS Alert

DPS Alert Debris IR15 N / CHEYENNE AVE;n n #3 12/05/2021 12:06:18 PM
submitted by MugShots to AlertVegas [link] [comments]


2021.12.05 17:09 andre_shreves new vlog

new vlog submitted by andre_shreves to SmallYTChannels [link] [comments]


2021.12.05 17:09 Bot_Highlights This poor soul hasn’t discovered you can break doors yet | /u/Pwn_sauce

This poor soul hasn’t discovered you can break doors yet | Pwn_sauce submitted by Bot_Highlights to ApexVideos [link] [comments]


2021.12.05 17:09 ass1434 Why does mid-air change in direction jumps exist?

It seems odd that in a "hardcore" game, hunters have the ability to move while they're in mid jump. Are they being propelled by their own flatulent? Impressive, if they are.
submitted by ass1434 to HuntShowdown [link] [comments]


2021.12.05 17:09 dustbred Dose this need at trip to the vet? What do you think has happend?

submitted by dustbred to vet [link] [comments]


2021.12.05 17:09 IceCweam5102 Bored.

Bored. submitted by IceCweam5102 to GayTeenSpace [link] [comments]


2021.12.05 17:09 Repnoob94 Find: Air Max 1 parra seller, preferably from Weidian or Taobao

submitted by Repnoob94 to BatchFloss [link] [comments]


2021.12.05 17:09 LibbysTampon Who is this and why is Paul posting him on his OnlyFans?

Who is this and why is Paul posting him on his OnlyFans? submitted by LibbysTampon to 90dayfianceuncensored [link] [comments]


2021.12.05 17:09 Bot_Highlights Had to share this, Solo Que Max KP on hot drop Plat Lobby. | /u/Insomuchagony

Had to share this, Solo Que Max KP on hot drop Plat Lobby. | Insomuchagony submitted by Bot_Highlights to ApexVideos [link] [comments]


2021.12.05 17:09 ThotSlayre Hey guys, what do you think of my first custom/sigfig? Please feel free to give me advice/criticism so I can improve :) (also there are a few images to show what they’re based on)

Hey guys, what do you think of my first custom/sigfig? Please feel free to give me advice/criticism so I can improve :) (also there are a few images to show what they’re based on) submitted by ThotSlayre to just2good [link] [comments]


2021.12.05 17:09 chris-Sedlak Fordham holds on in win over Princeton 76-67

A great win for the Rams, they got help from everyone today. Anna Dewolfe had 26 points for the Rams. This is their third quad one win of the season that includes victories over Michigan State and Stony Brook! They have another opportunity at the end of the month against FGCU. With this win, I think they have enough on their resume for an at large as long as they don’t lose to bad teams the rest of the year. This is a team that led Baylor at the half in Cancun and looks like a force to be reckoned with in the Atlantic ten. Look out for them come March. For Princeton they started to come back late thanks to Meyers who had four late threes but it was not enough. Princeton has an extremely difficult schedule coming up with Seton Hall, Buffalo, Texas and UCF up next on the schedule. I think they need at least two wins in those games to stay in the at large conversation if they cannot win the IVY for some reason.
https://www.espn.com/womens-college-basketball/game/_/gameId/401376770
submitted by chris-Sedlak to NCAAW [link] [comments]


2021.12.05 17:09 aryanyr How do you stop creating fake scenarios in your head?

What is the reason people end up creating these scenarios ?
submitted by aryanyr to selfimprovement [link] [comments]


2021.12.05 17:09 UsedEntertainment5 Had 8+ failed prints after successfully printing rook on my Mars 2. Please help.

Im getting very discouraged at this point. I cannot for the life of me get the print to stick to the build plate. I will hear the popping/peeling noise at first, but around layer 10 the sound disappears. I have a Mars 2 and am using Elegoo's ABS like grey. Things I have tried:
1) Leveling the buildplate after every fail with paper and even tried the paper the manual uses. 2) Applying PTFE lubricant to FEP. 3) Replacing FEP and tuning to 311Hz first then to 333Hz (current). 4) Heating the resin before use and making sure temperature outside is above 74. I live in FL. 5) Shaking resin for 2 minutes. 6) Changing bottom exposure time from 35 to 40 to 45. Don't want to go above those number since I heard it can cause problems unless you guys think its a good idea. 7) Adding tape to the sides of screen. 8) changed the Lifting speed from 40 to 80 then 100 because of some other posted setting that worked for that user 9) changed retract speed from 180 to 210 for the same reason as above. 10) updated firmware on Chitubox and Mars 2.
I do not want to sand my buildplate but I am considering it after all my fails.
My FEP is starting to get dimpled but it isn't bad and not cloudy so I think its still fine. I do not want to have to change this one out yet.
My current settings: https://ibb.co/VLwMzXc
What im printing: https://ibb.co/k4Cdx9w
Sorry for the phone pictures. It was just easier to use reddit on my phone.
submitted by UsedEntertainment5 to ElegooMars [link] [comments]


2021.12.05 17:09 420Dragotin42O Session mit Mondlandungs absichten

Session mit Mondlandungs absichten submitted by 420Dragotin42O to germantrees [link] [comments]


2021.12.05 17:09 Salad_Guru Safemoon Sunday

When is the safemoon Sunday? I thought it was at 2pm ET? I don’t see any news or updates?
submitted by Salad_Guru to SafeMoon [link] [comments]


2021.12.05 17:09 Okienana5 C We know

Sure is funny how the people defending you are teen girls. You in no way,shape or form are a roll model for them. Their brains are not developed enough to see the liar and scammer that you are.
submitted by Okienana5 to simplychristina87 [link] [comments]


2021.12.05 17:09 grayle 🐲 Let's talk about the Adventures in the Forgotten Realms: D&D x MtG

🐲 Let's talk about the Adventures in the Forgotten Realms: D&D x MtG submitted by grayle to kakitabletop [link] [comments]


2021.12.05 17:09 shad0wgun Fire red x2 are they real and another question

submitted by shad0wgun to gameverifying [link] [comments]


2021.12.05 17:09 simsmail Final Bear Fight Cut Scene Won’t Play

I’ve tried everything i could think of to fix it. Jeremiah won’t interact with me even though I have the radio parts because the cutscene didn’t play where the bear takes me to the cave. I checked the integrity of the files and it didn’t fix it. Please if you know how to fix it let me know. I thought about just restarting the signal to noise mission but I don’t know how without restarting the whole game.
submitted by simsmail to thelongdark [link] [comments]


2021.12.05 17:09 moodmessages Persona5 Royal

Just got the game recently and about to finish vanilla persona5, any tips on doing a merciless difficulty run in royal?
submitted by moodmessages to Persona5 [link] [comments]


2021.12.05 17:09 Sad-Jello-8104 Anyone else ever seen anything like this? Third time flowering from this single spike!

submitted by Sad-Jello-8104 to orchids [link] [comments]


2021.12.05 17:09 Widowmonger End Of Fortnite

End Of Fortnite submitted by Widowmonger to FortNiteBR [link] [comments]


2021.12.05 17:09 cucumberwitch 👀 polka tomorrow?

👀 polka tomorrow? submitted by cucumberwitch to OutdoorVoices [link] [comments]


2021.12.05 17:09 Bot_Highlights Respawn's Ban System Good Working | /u/MertTUTER

Respawn's Ban System Good Working | MertTUTER submitted by Bot_Highlights to ApexVideos [link] [comments]


2021.12.05 17:09 BoardWeak6554 DIY customers

I'm at a point where I don't even want to help them with colors. You help them pick out something and they agree they like it and get some paint in that color, but try to blame you when they end up not liking it and demand a refund saying it's your fault. Even though I confirm with them every time about the color. So annoying. 😑
submitted by BoardWeak6554 to sherwinwilliams [link] [comments]


http://akvarium2012.ru